Midmark M9 UltraClave® Automatic Sterilizer

Midmark M9 UltraClave® Automatic Sterilizer

Efficiency and capacity go hand in hand. Increase your practice’s efficiency when you increase your autoclave capacity. The Midmark M9 UltraClave® is designed to optimize sterilization output—reducing time and effort, but not effectiveness of your instrument processing.

  • Details

    • Intuitive display and simple prompts for easy operation

    • Patented, automatic-open door drying to promote faster, more efficient drying of instruments.

    • Four pre-programmed sterilization cycles: Unwrapped, Pouched, Packs, Handpieces

    • Programmable controls allow you to change exposure time, temperature, dry time and vent, and store your changes if desired

    • Steam-Flush Pressure Pulse Air Removal System designed to ensure proper steam penetration

    • LCD display alerts operator if door is not closed completely or reservoir water level is low

    • Reservoir fill port and drain tube located in the front of the unit for ease of draining and filling

  • Specifications

    • Overall length w/plug: 20.38" (51.8 cm)

    • Overall width: 15.3" (38.9 cm)

    • Overall height w/printer: 15.8" (40.1 cm)

    • Minimum countertop area: 17.88" (45.4 cm) D x 15.3" (38.9 cm) W Chamber:

    • 9" diameter (22.9 cm) • 15" depth (38.1 cm) • 3.5 gal usable volume (13.4 liters) Trays:

    • Two large – 7.3" W x 12" L x 0.8" D (18.6 cm x 30.5 cm x 2.2 cm)

    • Two small – 5.6" W x 12" L x 0.8" D (14.3 cm x 30.5 cm x 2.2 cm)

    • Unit weight: 73 lb (33.1 kg) • Shipping weight: 81 lb (36.7 kg)

    • Water reservoir capacity: 1.1 gal (4.1 liters)

    Electrical Requirements:

    • 115 VAC, 50/60 Hz, 15 A Single Phase

    • 115 VAC has 1425 W tubular immersion heater

    • 230 VAC, 50/60 Hz, 10 A Single Phase

    • 230 VAC has 1500 W tubular immersion heater Safety Standards:

    • UL Listed to U.S. & Canadian Standards

    • UL61010-1, 2nd Edition

    • IEC 61010-2-040, 1st Edition

    • CAN/CSA C22.2 No. 61010-1, 2nd Edition

    • CSA C22.2 No. 61010-2-040-07, Part 2-040, 1st Edition

    • Meets the requirements of ASME Boiler and Pressure Vessel Code

    • A separate (dedicated) circuit is recommended for this sterilizer

Contact us

Address: 21915 Valley Road Nuevo, CA 92567

+(714) 986-9938

©Copyright 2018 Quality Dental Supply Co All Rights Reserved

  • White Facebook Icon
  • White Yelp Icon

A partner of Yaeger Dental.